Carl, M0ICS, is testing a new release orf software for the Pi to feed H.264 into the DTX1 via. our TS Dock board. This incorporates new firmware from Evariste F5OEO which greatly reduces the latency between scene and RF out!
The plan is to demonstrate this at the Rochdale Radio Rally on 21st May and thereafter make it available in one form or another e.g. a straight download of the micro-SD card image (though that would be huge) or maybe even by way of pre-loaded cards.
More news as I have it
Many thanks in advance
Now it is working here is what I have on the menua
GENERAL - as you would expect, time and date
INPUT - AV Input 2
MODULATOR -RF Channel 437Mhz FEC 7/8 SR 333KSym/s
ENCODER - AV Input 2
then skip to ADVANCED TS Input 1 select and CLK MODE OFF
ADVANCED change to TS Input 2 select TS CLK Mode MAN CLK=< EDG=^
press down to get to
TS STREAM TYPE V=H264 A= MPEG2 if this is the mode you have set the RPI to.
This then worked with the Pi cam.
Hope this helps anyone else trying this....
I'm sorry for the late reply - probably best to email email@example.com for anything urgent
Anyway these components are not critical, merely an offering to the Gods of EMC.
A couple of ferrite beads slipped over wire are fine. I doubt that shorting the inductors out would cause any real issue at a push.
Who is online
Users browsing this forum: No registered users and 1 guest