This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
73 Shaun G8VPG.
I've played with these a little but not done a great deal as there was nobody within range of me!!
The nodes work on their own IP group, ie not 192.168.x.x.
The Linksys box can be connected to your regular router through the wan port on the back to be able to bridge between network groups, if this is done then you can get access to the Node network addresses from a pc on that regular network and allow (restricted) internet access to the node network but it is tricky to make work well regarding hostnames and routing.
The PC running minitioune can be connected to your normal router with the node connected as described above OR you can directly connect the Minitioune pc to the Linksys router on one of it's node LAN ports, the pc will then gain an IP address on the node network directly.
Getting the UDP packets to go out on the node network will require some routing tricks, eg in windows command line on minitioune pc:
route add 188.8.131.52 mask 240.0.0.0 <IP address of PC>
The IP address will depend on how you connect the pc to the network, getting the route to work using the first method will no doubt be more difficult.
Hopefully something useful there?!
Who is online
Users browsing this forum: No registered users and 1 guest