This forum is run by the BATC (British Amateur Television Club), it is service made freely available to all interested parties, please do not abuse this privilege.
Adverts will be archived when the poster indicates that the item is found or after one year. If you wish to keep advertising after one year, please re-post.
It isn't the LCD control chip I need ( I believe that is what Mobicomm is selling on eBay )
Its the chips that come with the boards from the supplier.
Many users remove those when using an LCD controller, which is what I did around 12 years ago. I've since misplaced them dispite searching.
I've obtained some other Comtech boards from a silent key and don't wish to use an LCD controller with these hence my request " Wanted Comtech Chips/ICs "
Thanks again.. Ken
looking deeper in the Mobicomm ebay shop I found this chip:
http://www.ebay.it/itm/DFM-PLL-Control- ... 1e97876e7d
although it is only for the RX board...
maybe you can write to them asking for the TX one!
They are just standard 16F628 PICs - blank ones on ebay for less than £3.
I was given a set of all the hex files by Giles G1MFG for distribution as needed - I'm sure we put them on the BATC website somewhere but if not I have a copy here.
Noel - G8GTZ
I have code for 23cm & 13cm TX & RX. This is not copyright code, I reverse engineered how the module is programmed and wrote my own from scratch.
Let me know if you want one, I guess about £6 posted would cover it.
Who is online
Users browsing this forum: No registered users and 1 guest